EN-Engineering-Product-Direct-rolled-HSS-All Grades OverviewTSN

Overview

Ymagine^® HSLA grades

Ymagine also comes in five high-strength, low-alloy (HSLA) grades offering either weight savings or enhanced product strength without weight penalties. The consistent quality of this direct-rolled steel ensures repeatable and reliable performance.

Ymagine H500 offers excellent formability. It has been developed to meet the growing demand for strong but lightweight automotive components in gauges that are difficult to produce by conventional hot strip mills.

Relationship with standards

Tata Steel	EN 10149-2:2013	R_eH / R_p	R_m	A₈₀	A_dp5
Grade	Hot-rolled	N/mm²	N/mm²	%	%
				t < 3.0	t ≥ 3.0
Ymagine H320	S315MC	≥ 315	390 - 510	≥ 20	-
Ymagine H360	S355MC	≥ 355	430 - 550	≥ 19	≥ 23
Ymagine H420	S420MC	≥ 420	480 - 620	≥ 16	≥ 19
Ymagine H500	S500MC	≥ 500	550 - 700	≥ 12	≥ 14

t - material thickness in mm.

Tata Steel	EN 10268:2006 longitudinal test pieces	Rp	Rm	A80
Grade	Cold-rolled	N/mm²	N/mm²	%
Ymagine H240	HC260LA	240 - 310	340 - 420	≥ 27
Ymagine H320	HC340LA	320 - 410	400 - 500	≥ 22
Ymagine H360	HC380LA	360 - 460	430 - 550	≥ 20
Ymagine H420	HC420LA	400 - 500	460 - 580	≥ 18

EN-Engineering-Product-Direct-rolled-HSS-Ymagine H320-Properties TSN

Properties

Mechanical Properties

The mechanical properties are measured longitudinal to the rolling direction.

Direct-rolled			Ymagine H320
			Typical value	Guaranteed values
R_p	N/mm²		340	320 - 410
R_m	N/mm²		425	400 - 500
A₈₀	%	t < 3.0	30	≥ 22
A_dp5	%	t ≥ 3.0	-	-

t - material thickness in mm.

Chemical composition

Cast analysis in weight percentages:

Direct-rolled	YmagineH320
	Typical	Guaranteed (max)
C	0.045	0.065
Mn	0.25	0.31
P	0.008	0.025
S	0.007	0.015
Si ¹	0.018	0.035
Nb	0.01	0.015
V	refer	refer

^1. For the purpose of batch galvanising, Ymagine high-strength steels can be ordered on consultation with a maximum Si content of 0.030%.

EN-Engineering-Product-Direct-rolled-HSS-Ymagine H320 Dimensions TSN

Dimensions

Dimensions in mm.

Thickness	Maximum width
From - up to	Ymagine H320
1.15 - 1.19	-
1.19 - 1.50	1530
1.50 - 2.00	1530
2.00 - 3.00	1530
3.00 - 4.00	-

Minimum width is 1000 mm
Other dimensions may be available - please contact us.

EN-EngineeringAutomotive-Product-Ymagine Direct-rolled-All grades Shape and dimensional tolerancesTSN

Shape and dimensional tolerances

Tolerances on thickness

Ymagine is available with the following tolerances.

Dimensions in mm:

Thickness	Tolerances
1.15 ≤ t ≤ 2.0	± 0.05
2.0 < t ≤ 2.5	± 0.06 ¹
2.5 < t ≤ 3.0	± 0.07 ²
3.0 < t ≤ 4.0	± 0.09 ³

^1. In some instances, the material will be supplied with a tolerance of -0.06/+0.15 mm,
only on the coil head and tail and to a maximum of 20 metres from the start of the coil.
^2. In some instances, the material will be supplied with a tolerance of -0.07/+0.17 mm,
only on the coil head and tail and to a maximum of 20 metres from the start of the coil.
^3. In some instances, the material will be supplied with a tolerance of -0.09/+0.21 mm,
only on the coil head and tail and to a maximum of 20 metres from the start of the coil.

Tolerances on width

Width tolerances comply with standard EN 10051: 2010 (hot-rolled) and
EN 10131: 2006 (cold-rolled). Closer tolerances are possible – please contact us for details.

Width tolerances for Hot-rolled products

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Width tolerances for Cold-rolled products

Tolerances in mm.

Nominal width w	Normal tolerances		Special tolerances (S)
Nominal width w	Under	Over	Under	Over
w ≤ 1200	0	4	0	2
1200 < w ≤ 1500	0	5	0	2
w > 1500	0	6	0	3

Special width tolerances may be available (± 0.50 mm available on 750 - 2000 mm width). Please contact us for details.

Dimensions and coil weights

The weight of weld-free coils can be specified freely between 13 and 20.5 kg/mm.

Ymagine is supplied with trimmed edges as standard. Mill edges are available on request.

Description	Dimension or weight
Outside diameter	minimum 1050 mm maximum 2000 mm (Ymagine) maximum 2100 mm (mill scale)
Coil Weight	maximum 31.5 tonne ¹

Description

Dimension or weight

Outside diameter

minimum 1050 mm

maximum 2000 mm (Ymagine)

maximum 2100 mm (mill scale)

Coil Weight

maximum 31.5 tonne ¹

^1.For Ymagine H500 the maximum coil weight is 25 tonne for thicknesses > 2.5 mm.
Above 3.20 mm maximum coil weight for all grades is 25 tonne. Higher coil weights available on request.

Tata Steel assumes a minimum and a maximum coil weight agreed upon with the customer on the basis of our normal production practices and an order quantity corresponding to this coil weight. Usually a minimum coil weight up to 90% of the maximum coil weight can be requested.

Surface aspects

The surface quality of Ymagine is comparable to hot-rolled pickled and oiled i.e. 1 - 3 μm Ra (cut off 2.5mm).
Ymagine is suitable for cold-rolled applications that are not surface-critical.

EN-EngineeringAutomotive-Product-Hot-rolled-Heavy+Light further processing TSE

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4 m
Locations	Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6 m	up to 6 m
Locations	Netherlands Germany France Spain Sweden Norway Finland	Netherlands Germany France Spain Sweden Norway Finland	Netherlands