Hot-rolled

Heat treatable steel

Tata Steel offers a choice of hot-rolled heat-treatable steels

Boron steels offer advantages across many applications. We exercise stringent control over chemical composition and production processes, resulting in a robust, consistent and reliable quality you can depend on.

The chemical composition of our boron manganese steel family makes it suitable for forming complex shapes. After a quench and temper step at the customer, the end product will gain its final hardness.

Boron manganese steel brochure

Product specification

Heat treatable steels are currently available in the following grades

EN-Engineering-Product-Hot-Rolled-Heat treatable steel-22MnB5 TSE

22MnB5

Specification details for 22MnB5

EN-Engineering-Product-Hot-Rolled-Heat treatable steel-Boron manganese Overview TSE

Overview

Tata Steel offers a choice of hot-rolled heat-treatable steel. Its chemical composition and the production processes we employ ensure robust, consistent products.

Manganese boron steel

Consistent formability combined with excellent strain hardening behaviour.

The 22MnB5, 26MnB5, 27MnB5, 27MnCrB5-2, 30Mn5, 30MnB5, 34MnB5 and 38MnB5 grades are hot-rolled, uncoated products that are primarily used for end products with complex shapes.
In ‘as-delivered’ condition the material is considered ‘soft’, enabling the forming of relatively difficult shapes. The final strength of the end product is usually provided during a heat treatment process at the customer, resulting in a longer life span. The manganese boron product range also features homogeneous material properties that enable consistent and predictable performance of the final component. The material is very clean, meaning the levels of impurities are carefully controlled, which helps with consistency in formability and weldability.

These grades are used in a variety of applications, such as harrow discs and plough points (Agriculture), twist beams and stabilisers (Automotive) tubes and centralisers (Oil & Gas). Because of the unique dimensions offered, these products can be processed very effectively and with limited yield loss through optimised nesting.

Feel free to contact us for more options in our MnB family such as other grades and chemistries, other dimensions or minimum order quantity.

EN-EngineeringAutomotive-Product-Hot-rolled-All Grades Surface aspects Supply Conditions TSE

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.5-2.5 g/m²

Alternative oiling ranges are available.
Please contact us for details.

EN-Engineering-Product-Hot-Rolled-Heat treatable steel-22MnB5-Properties TSE

Properties

Mechanical properties

The values of the tensile test apply to test bars longitudinal to the rolling direction.

Grade	22MnB5 Typical
Yield strength R_p (N/mm²)	395
Tensile strength R_m (N/mm²)	575
Elongation ¹ A₅₀ ₍₅₎ (%)	15

^1. The index of elongation A refers to the type of tensile test sample.

Chemical composition

	Grade	22MnB5
C	Min. - Max.	0.21 - 0.25
Mn	Min. - Max.	1.20 - 1.30
P	Max.	0.020
S	Max.	0.010
A_ltot	Min. - Max.	0.020 - 0.060
Si	Min. - Max.	0.20 - 0.30
Cr	Min. - Max.	0.15 - 0.25
Ti	Min. - Max.	0.020 - 0.035
B	Min. - Max.	0.0020 - 0.0035

All values are in weight%.

CEV

The typical carbon equivalent value is 0.49.

EN-Engineering-Product-Hot-Rolled-Heat treatable steel-22MnB5-Dimensions TSE

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	22MnB5
2.50 - 3.00	1500
3.00 - 4.00	1735
4.00 - 5.00	1875
5.00 - 6.00	2015
6.00 - 20.00	2070

Minimum width is 1000 mm.
Please contact us for the availability of 22MnB5 below 2.5 mm.
Other dimensions are available - please contact us.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	22MnB5
2.50 - 3.00	1500
3.00 - 4.00	1735
4.00 - 5.00	1875
5.00 - 6.00	2015
6.00 - 8.00	2070
8.00 - 10.00	1600

Minimum width is 1000 mm.
Please contact us for the availability of 22MnB5 below 2.5mm.
Other dimensions are available - please contact us.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.

Tighter tolerances are available, please contact us.

EN-EngineeringAutomotive-Product-Hot-rolled-All grades Shape and dimensional tolerances TSE

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’).
The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product type	Thickness tolerances available
	(% of full EN 10051:2010 tolerance)
	100%	75%	66%	60%	50%	33%
Steel for forming	Yes	Yes	Yes	Yes	Yes	Yes ¹
High-strength low-alloy (HSLA EN 10149-2)	Yes	Yes	Yes	Yes	Yes	Yes ¹
Ympress^® HSLA					Yes	Yes ¹
Ympress^® Laser					Yes	Yes ¹
Structural steel	Yes	Yes	Yes	Yes	Yes	Yes ¹
Manganese boron steel	Yes	Yes	Yes	Yes	Yes
Case-hardening steel	Yes	Yes	Yes	Yes	Yes
High-carbon steel	Yes
Dual phase steel	Yes
Hot forming steel	Yes
Valast® abrasion resistant steel	Yes	Yes	Yes	Yes	Yes
Steel for pressure vessels	Yes
Steel for gas cylinders	Yes
Steel for line pipe	Yes
Ship plate	Yes

^1. Available for certain grades and thicknesses between 3.0 mm and 6.0 mm.
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content
for cold forming (DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum
yield strength R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum
yield strength 300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum
yield strength 360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum
yield strength 420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’).
The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000 mm:

• with mill edges, no more than 20 mm
• with trimmed edges, no more than 15 mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values
on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel
with a low carbon content for cold forming (DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S275 > 10mm in EN 10025-2:2004) and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762 mm
Coil diameter inner pickled	610 mm standard
Coil diameter inner pickled	762 mm on request
Tolerance on inner diameter	+0/-50 mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2300 mm
	Min. 1200 mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200 mm
	Min. 1050 mm
Coil weight	Max. 38,5 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
KIM*: width ≤ 1200 mm	max. 23.1 kg/mm width
KIM*: 1200 < width ≤ 1700 mm	max. 21.6 kg/mm width
KIM*: 1700 < width ≤ 1900 mm	max. 20.9 kg/mm width
KIM*: width > 1900 mm	max. 18.8 kg/mm width
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

* Other KIM values may be available - please contact us.

EN-EngineeringAutomotive-Product-Hot-rolled-Heavy+Light further processing TSE

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4 m
Locations	Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6 m	up to 6 m
Locations	Netherlands Germany France Spain Sweden Norway Finland	Netherlands Germany France Spain Sweden Norway Finland	Netherlands

For further information please visit our Service Centre webpages.

EN-Engineering-Product-Hot-Rolled-Heat treatable steel-Download TSE

Download

Download:

EN-Engineering-Brochure-Boron-Manganese-Steel

Boron manganese steel - Brochure

Brochure

English

High formability combined with ultimate wear resistance

tata-steel-engineering-boron-manganese-wear-resistant-brochure-en.pdf5.98 MB

DE-Engineering-Brochure-Boron-Manganese-Steel

Boron manganese steel - Brochure (DE)

Brochure

German (Deutsch)

Hohe Verformbarkeit kombiniert mit höchster Verschleißfestigkeit

tata-steel-engineering-boron-manganese-wear-resistant-brochure-de.pdf5.98 MB

EN-Engineering-Casestudy-MnB Frank Original

Boron manganese steel: Frank Original - Case study

Case study

English

Boron manganese steel for agricultural machinery

EN-Engineering-Casestudy-MnB-Frank-Original.pdf8.54 MB

DE-Engineering-Casestudy-MnB Frank Original

Boron manganese steel: Frank Original - Case study (DE)

Case study

German (Deutsch)

Boron manganese steel for agricultural machinery

	Grade	26MnB5
C	Min. - Max.	0.24 - 0.28
Mn	Min. - Max.	1.20 - 1.40
P	Max.	0.015
S	Max.	0.010
Al_tot	Min. - Max.	0.020 - 0.060
Si	Min. - Max.	0.20 - 0.25
Cr	Min. - Max.	0.10 - 0.20
Ti	Min. - Max.	0.020 - 0.035
B	Min. - Max.	0.0020 - 0.0035

Thickness	Max. width
From - up to	26MnB5
2.50 - 3.00	1500
3.00 - 4.00	1735
4.00 - 5.00	1875
5.00 - 6.00	2015
6.00 - 20.00	2070

Thickness	Max. width
From - up to	26MnB5
2.50 - 3.00	1500
3.00 - 4.00	1735
4.00 - 5.00	1875
5.00 - 6.00	2015
6.00 - 8.00	2070
8.00 - 10.00	1600

Grade	27MnB5 Typical
Yield strength R_p (N/mm²)	400
Tensile strength R_m (N/mm²)	600
Elongation ¹ A_{50 (5)} (%)	25

	Grade	27MnB5
C	Min. - Max.	0.245 - 0.275
Mn	Min. - Max.	1.150 - 1.250
P	Max.	0.020
S	Max.	0.010
Al_tot	Min. - Max.	0.020 - 0.060
Si	Min. - Max.	0.20 - 0.25
Cr	Min. - Max.	0.20 - 0.30
Ti	Min. - Max.	0.020 - 0.035
B	Min. - Max.	0.0020 - 0.0035

Thickness	Max. width
From - up to	27MnB5
4.00 - 4.50	1880
4.50 - 5.00	1950
5.00 - 6.00	2015
6.00 - 20.00	2070

Grade		27MnCrB5-2 Typical
Yield strength Rp (N/mm²)		370
Tensile strength Rm (N/mm²)		630
Elongation 1 A50 (5) (%)	t ≤ 5	23
	t > 5	25

	Grade	27MnCrB5-2
C	Min. - Max.	0.26 - 0.30
Mn	Min. - Max.	1.20 - 1.35
P	Max.	0.020
S	Max.	0.010
Altot	Min. - Max.	0.020 - 0.060
Si	Min. - Max.	0.15 - 0.30
Cr	Min. - Max.	0.30 - 0.60
Ti	Min. - Max.	0.020 - 0.035
B	Min. - Max.	0.0020 - 0.0035

	Grade	30Mn5
C	Min. - Max.	0.29 - 0.33
Mn	Min. - Max.	1.25 - 1.45
P	Max.	0.02
S	Max.	0.01
Al	Min. - Max.	0.010 - 0.050

Grade	30MnB5 Typical
Yield strength R_p (N/mm²)	375
Tensile strength R_m (N/mm²)	600
Elongation ¹ A₅₀₍₅₎ (%)	24

	Grade	30MnB5
C	Min. - Max.	0.28 - 0.31
Mn	Min. - Max.	1.15 - 1.35
P	Max.	0.020
S	Max.	0.010
Al_tot	Min. - Max.	0.020 - 0.060
Si	Min. - Max.	0.20 - 0.25
Cr	Min. - Max.	0.15 - 0.25
Ti	Min. - Max.	0.020 - 0.035
B	Min. - Max.	0.0020 - 0.0035

Thickness	Max. width
From - up to	30MnB5
2.50 - 3.00	1500
3.00 - 4.00	1735
4.00 - 5.00	1875
5.00 - 6.00	2015
6.00 - 20.00	2070

	Grade	34MnB5
C	Min. - Max.	0.33 - 0.37
Mn	Min. - Max.	1.20 - 1.40
P	Max.	0.015
S	Max.	0.010
Al_tot	Min. - Max.	0.020 - 0.060
Si	Min. - Max.	0.20 - 0.25
Cr	Min. - Max.	0.10 - 0.20
Ti	Min. - Max.	0.020 - 0.035
B	Min. - Max.	0.0020 - 0.0035

Heat treatable steel

Tata Steel offers a choice of hot-rolled heat-treatable steels

Manganese boron steel

Supply - product conditions

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Alternative oiling ranges are available.Please contact us for details.

Mechanical properties

1. The index of elongation A refers to the type of tensile test sample.

Chemical composition

All values are in weight%.

CEV

Dimensional capability - non-pickled

Minimum width is 1000 mm. Please contact us for the availability of 22MnB5 below 2.5 mm. Other dimensions are available - please contact us.

Dimensional capability - pickled

Minimum width is 1000 mm. Please contact us for the availability of 22MnB5 below 2.5mm. Other dimensions are available - please contact us.

Tolerances

Shape and dimensional tolerances

Tolerances on thickness

1. Available for certain grades and thicknesses between 3.0 mm and 6.0 mm.Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming (DD11-DD14 in EN 10111:2008)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength Re ≤ 300 N/mm2 (category A)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength 300 N/mm2 < Re ≤ 360 N/mm2 (category B)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength 360 N/mm2 < Re ≤ 420 N/mm2 (category C)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength 420 N/mm2 < Re ≤ 900 N/mm2 (category D)

All dimensions are mm.

Tolerances on width

Edge camber

Flatness

Option for maximum crown values

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming (DD11-DD14 in EN 10111:2008)

Maximum Crown C40 in µm values of structural steel grades(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Maximum Crown C40 in µm values of structural steel grades (S275 > 10mm in EN 10025-2:2004) and HSLA grades (S315MC in EN 10149-2:1996)

Maximum Crown C40 in µm values of HSLA grades (S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Dimensions and coil weights

Further processing

Heavy gauge processing

Light gauge processing

For further information please visit our Service Centre webpages.

Download:

Boron manganese steel - Brochure

Boron manganese steel - Brochure (DE)

Boron manganese steel: Frank Original - Case study

Boron manganese steel: Frank Original - Case study (DE)

Boron manganese steel: 22MnB5 - Data sheet

Boron manganese steel: 22MnB5 - Data sheet (DE)

Boron manganese steel: 26MnB5 - Data sheet

Boron manganese steel: 26MnB5 - Data sheet (DE)

Boron manganese steel: 27MnB5 - Data sheet

Boron manganese steel: 27MnB5 - Data sheet (DE)

Boron manganese steel: 27MnCrB5-2 - Data sheet

Boron manganese steel: 27MnCrB5-2 - Data sheet (DE)

Boron manganese steel: 30MnB5 - Data sheet

Boron manganese steel: 30MnB5 - Data sheet (DE)

Boron manganese steel: 34MnB5 - Data sheet

Boron manganese steel: 34MnB5 - Data sheet (DE)

Boron manganese steel: 38MnB5 - Data sheet

Boron manganese steel: 38MnB5 - Data sheet (DE)

Manganese boron steel

Supply - product conditions

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Alternative oiling ranges are available.Please contact us for details.

Mechanical properties

1. The index of elongation A refers to the type of tensile test sample.

Chemical composition

All values are in weight%. For alternative chemistries, please contact your sales representative/technical support engineering/marketing.

CEV

Dimensional capability - non-pickled

Minimum width is 1000 mm.Please contact us for the availability of 26MnB5 below 2.5 mm. Other dimensions are available - please contact us.

Dimensional capability - pickled

Minimum width is 1000 mm.Please contact us for the availability of 26MnB5 below 2.5 mm. Other dimensions are available - please contact us.

Tolerances

Shape and dimensional tolerances

Tolerances on thickness

1. Available for certain grades and thicknesses between 3.0 mm and 6.0 mm.Please contact us on the availability of special tolerances to meet your requirements.

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.

Alternative oiling ranges are available.
Please contact us for details.

^1. The index of elongation A refers to the type of tensile test sample.

Minimum width is 1000 mm.
Please contact us for the availability of 22MnB5 below 2.5 mm.
Other dimensions are available - please contact us.

Minimum width is 1000 mm.
Please contact us for the availability of 22MnB5 below 2.5mm.
Other dimensions are available - please contact us.

^1. Available for certain grades and thicknesses between 3.0 mm and 6.0 mm.
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content
for cold forming (DD11-DD14 in EN 10111:2008)

Tolerances on thickness of steel grades with a specified minimum
yield strength R_e ≤ 300 N/mm² (category A)

Tolerances on thickness of steel grades with a specified minimum
yield strength 300 N/mm² < R_e ≤ 360 N/mm² (category B)

Tolerances on thickness of steel grades with a specified minimum
yield strength 360 N/mm² < R_e ≤ 420 N/mm² (category C)

Tolerances on thickness of steel grades with a specified minimum
yield strength 420 N/mm² < R_e ≤ 900 N/mm² (category D)

Maximum Crown C40 in µm values for hot-rolled steel
with a low carbon content for cold forming (DD11-DD14 in EN 10111:2008)

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Maximum Crown C40 in µm values of structural steel grades
(S275 > 10mm in EN 10025-2:2004) and HSLA grades (S315MC in EN 10149-2:1996)

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.

Alternative oiling ranges are available.
Please contact us for details.

^1. The index of elongation A refers to the type of tensile test sample.

All values are in weight%.
For alternative chemistries, please contact your sales representative/technical support engineering/marketing.

Minimum width is 1000 mm.
Please contact us for the availability of 26MnB5 below 2.5 mm.
Other dimensions are available - please contact us.

Minimum width is 1000 mm.
Please contact us for the availability of 26MnB5 below 2.5 mm.
Other dimensions are available - please contact us.

^1. Available for certain grades and thicknesses between 3.0 mm and 6.0 mm.
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content
for cold forming (DD11-DD14 in EN 10111:2008)

Tolerances on thickness of steel grades with a specified minimum
yield strength R_e ≤ 300 N/mm² (category A)

Tolerances on thickness of steel grades with a specified minimum
yield strength 300 N/mm² < R_e ≤ 360 N/mm² (category B)

Tolerances on thickness of steel grades with a specified minimum
yield strength 360 N/mm² < R_e ≤ 420 N/mm² (category C)

Tolerances on thickness of steel grades with a specified minimum
yield strength 420 N/mm² < R_e ≤ 900 N/mm² (category D)

Maximum Crown C40 in µm values for hot-rolled steel
with a low carbon content for cold forming (DD11-DD14 in EN 10111:2008)

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Maximum Crown C40 in µm values of structural steel grades
(S275 > 10mm in EN 10025-2:2004) and HSLA grades (S315MC in EN 10149-2:1996)

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)