Ymagine® Direct-rolled

Steel for forming

Ymagine® D1 is a direct-rolled, pickled and oiled, basic light-gauge drawing grade. Like all of our Ymagine grades, it is suitable for a range of production processes. Consistent product characteristics deliver trouble-free processing and help to maximise yield.

Ymagine direct-rolled steel coil
Product specification
Steel for forming is currently available in the following grade

EN-Engineering-Product-Direct-rolled-Forming-Ymagine D1 TSN

Ymagine D1
Specification details for Ymagine D1

EN-Engineering-Product-Ymagine Direct-rolled-HSS-Ymagine D1-Properties TSN

Properties

Mechanical properties

The mechanical properties are measured transverse to the rolling direction:

Relationship with European standard EN 10111: 2008  Hot-rolled flat products DD11
ReL / Rp (N/mm²)   170 - 360
Rm (N/mm²)   ≤ 440
A80 (%) t < 3 ≥ 23
Adp5 (%) t ≥ 3 ≥ 28

 

Ymagine D1   Typical value Guaranteed values
Rp (N/mm²)   290 210 - 360
Rm (N/mm²)   380 335 - 425
A80 (%) t < 3 28 ≥ 23
Adp5 (%) t ≥ 3 - ≥ 28


Chemical composition

Cast analysis in weight percentages:

Ymagine D1 Typical Guaranteed (max)
C 0.045 0.065
Mn 0.220 0.300
P 0.008 0.025
S 0.007 0.015
Si 0.018 0.035

 

 

 

 

 
For the purpose of batch galvanising, Ymagine® D1 can be ordered after consultation with a maximum Si content of 0.030%. 

EN-EngineeringAutomotive-Product-Ymagine Direct-rolled-All grades Shape and dimensional tolerancesTSN

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Ymagine is available with the following tolerances.

Dimensions in mm:

Thickness

Tolerances

1.15 ≤ t ≤ 2.0

± 0.05

2.0 < t ≤ 2.5

± 0.06 1

2.5 < t ≤ 3.0

± 0.07 2

3.0 < t ≤ 4.0

± 0.09 3

1. In some instances, the material will be supplied with a tolerance of -0.06/+0.15 mm,  
   only on the coil head and tail and to a maximum of 20 metres from the start of the coil.
2. In some instances, the material will be supplied with a tolerance of -0.07/+0.17 mm,  
   only on the coil head and tail and to a maximum of 20 metres from the start of the coil.
3. In some instances, the material will be supplied with a tolerance of -0.09/+0.21 mm,  
   only on the coil head and tail and to a maximum of 20 metres from the start of the coil.
 

Tolerances on width

Width tolerances comply with standard EN 10051: 2010 (hot-rolled) and
EN 10131: 2006 (cold-rolled). Closer tolerances are possible – please contact us for details.
 

Width tolerances for Hot-rolled products 

Tolerances in mm.

Nominal width w
Mill edges Trimmed edges
lower upper lower upper

 w ≤ 1200

0

20

0

3

 1200 < w ≤ 1850

0

20

0

5

 w > 1850

0

25

0

6

 

Width tolerances for Cold-rolled products

Tolerances in mm.

Nominal width w

Normal tolerances

Special tolerances (S)

Under

Over

Under

Over

w ≤ 1200

0

4

0

2

1200 < w ≤ 1500

0

5

0

2

w > 1500

0

6

0

3

Special width tolerances may be available (± 0.50 mm available on 750 - 2000 mm width). Please contact us for details.
 

Dimensions and coil weights

The weight of weld-free coils can be specified freely between 13 and 20.5 kg/mm.

Ymagine is supplied with trimmed edges as standard. Mill edges are available on request.

Description

Dimension or weight

Outside diameter

minimum 1050 mm

maximum 2000 mm (Ymagine)

maximum 2100 mm (mill scale)

Coil Weight

maximum 31.5 tonne 1

1. For Ymagine H500 the maximum coil weight is 25 tonne for thicknesses > 2.5 mm.
Above 3.20 mm maximum coil weight for all grades is 25 tonne. Higher coil weights available on request.

Tata Steel assumes a minimum and a maximum coil weight agreed upon with the customer on the basis of our normal production practices and an order quantity corresponding to this coil weight. Usually a minimum coil weight up to 90% of the maximum coil weight can be requested.
 

Surface aspects

The surface quality of Ymagine is comparable to hot-rolled pickled and oiled i.e. 1 - 3 μm Ra (cut off 2.5mm).
Ymagine is suitable for cold-rolled applications that are not surface-critical.

 

EN-EngineeringAutomotive-Product-Hot-rolled-Heavy+Light further processing TSE

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type Decoiling
Thickness range (mm) 1.4 - 25.4
Width range (mm) 300 - 2600
Length range up to 18.4 m
Locations Netherlands

 

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6 m up to 6 m
Locations Netherlands
Germany
France
Spain
Sweden
Norway
Finland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
Netherlands


For further information please visit our Service Centre webpages.