Service Centre Maastricht
Overview
Manual
Finland - Naantali Steel Service Centre
Overview

‘Our customers use our products for manufacturing a variety of different components as well as end-products including ventilation ducts, cable racks, light fittings, silos, conveyors, cabin modules, refrigeration equipment and roofing products. Over 90% of our customers are located in Finland,’ reports Ilpo Maaranen, General Manager of Naantali Steel Service Centre.

The steel, supplied from Tata Steel’s manufacturing facilities in Europe and from quality third party producers, is delivered to the service centre mostly in coil form. Naantali Steel Service Centre then uses its eight processing lines to produce steel blanks and narrow coils in precise dimensions according to customer requirements. These production lines include four cut-to-length lines, three slitting lines and one recoiling line.

‘Our strengths include the range of processing facilities and our experienced and capable team, this helps ensure we keep quality levels high and deliveries are fast and reliable. Many of our customer relationships are long-term,’ Mr Maaranen reports.

Steel products are processed according to tight dimensional tolerances. Sheets are suitable for automated storage and machine tools equipped with sheet processing equipment. The material dimensions processed at Naantali can range from 0.4mm to 6mm in thickness in sheet lengths as high as 12 metres. Thicker hot-rolled and pickled cut length sheets are also a key part of the local inventory.

The short delivery times are partly due to Naantali’s extensive storage capacity. Steel is stored in our warehouses according to customer requirements, so products can be processed quickly as soon as they are needed. Meanwhile, our standard sizes service, offers delivery of sheet steel and hot-rolled products in set dimensions in 1 to 2 working days.

In addition, the well designed, clean, tidy storage facilities play a key part in ensuring that steel quality is not compromised at any point during the storage and production processes. The service centre puts great emphasis on maintaining rigorous work safety standards and procedures at all times.

The service centre began operations in Naantali as a steel warehouse in 1972. It has previously been owned by various companies, including Kesko and Rautaruukki. It became part of Tata Steel in Europe in 2015, at which point the Naantali Steel Service Centre was established.

Our products include: 

  • hot-dip galvanised steels
  • electro-galvanised steels
  • aluminium zinc galvanised steels
  • pre-finished or colour coated steels
  • cold-rolled steels
  • hot-rolled steels

 

 

Processing capability
Manual
Finland - Naantali Steel Service Centre
Processing capability

At Naantali SSC we have total of four cut-to-length lines, two slitting lines and a recoiling line in which we can process wide variety of steel products. 

Processing capabilities at Naantali Steel Service Centre Oy comprise:

  Slitting Decoiling Recoiling
Thickness 0.4 – 3.0mm 0.4 – 6.0mm 0.4-1.5mm
Width (20) 30 –1500mm < 2050mm 400-1250mm
Length - 400 –12000mm -


Please consult our sales department regarding specific technical feasibility of dimensional combinations, tolerances and grades. You can find details on how to get in touch with us in the 'Contacts' section or 'Contact Us' below.

Contacts
Manual
Finland - Naantali Steel Service Centre
For all sales and technical enquiries please contact:

Tata Steel
Naantali Steel Service Centre Oy
Rautakatu 5
21110 Naantali
Finland


To order, offer requests and information

T: +358 (0)10 28 76 903
E: sales.naantali@tatasteeleurope.com


site map

 

Sales

South and West Finland, Baltics 
Mikko Ojanto, Area Sales Manager
+358 40 717 7918

mikko.ojanto@tatasteeleurope.com 

 

Ostrobothnia, North Finland, stockiest in Finland and Baltics 
Mikko Kurttila, Area Sales Manager
+358 40 844 3218

mikko.kurttila@tatasteeleurope.com

 

Middle and East Finland 
Toni Vuolle, Area Sales Manager
+358 40 519 7356

toni.vuolle@tatasteeleurope.com

 

Baltics

Eno Saar, Area Sales Manager

+372 5852 9658

eno.saar@tatasteeleurope.com 

 

Sales support

Anne Tauriainen, Sales Assistant
Eila Suni, Sales Assistant
+358 10 287 6903
Sales.Naantali@tatasteeleurope.com

Marko Juhannusvuori, Sales Manager
+358 41 435 3635

marko.juhannusvuori@tatasteeleurope.com

 

Opening hours

Naantali SSC ensures the loading of all vehicles during the official loading times from Monday to Thursday, between 7:00 am and 14:00 pm, on Friday between 7:00 am and 13:00 pm. 
The exact loading time will be announced weekly depending on the load. 


Naantali SSC ensures the unloading of all vehicles during the official unloading times from Monday to Thursday, between 07:00 am and 19:00 pm, on Friday between 07:00 am and 16:00 pm. The exact loading time will be announced weekly depending on the unload.

Sales/customer service (Monday - Friday) 08.00 am to 16.00 pm.

Dispatch office (Monday – Friday) 7:00 am to 15:00 pm.