Advantica® for HEVAC
Pre-finished steel products are used extensively in the heating, ventilation and air conditioning industry. Applications include; ventilation ducts, boilers, radiators and air conditioning units.
We produce flexible, waterproof products manufactured to suit both the processing requirements and end use without damaging the product.
EN-Construction-Product-Advantica for HEVAC - Advantica® F Heat
EN-Construction-Product-Advantica Lighting - Advantica® F Heat | Product features
Advantica® F Heat
- A pre-finished steel product with excellent heat resistance
Characteristics
• Very good heat performance
• Smooth surface appearance
Substrates available
• Hot-dip galvanised to EN 10346
• Cold reduced to EN 10130
Options
• Alternative backing coats available
• Protective film
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica Lighting - Advantica® F Heat | Typical properties
Advantica® F Heat
| Typical properties | Test specification | ||
|---|---|---|---|
| Nominal coating thickness |
μm | 25 | EN 13523-1 |
| Specular gloss (60°) | GU |
50-60 |
EN 13523-2 |
| Adhesion on bending | T | 0 | EN 13523-7 |
| Flexibility (minimum bend radius) |
T | 3 | EN 13523-7 |
| Pencil hardness | F | EN 13523-4 | |
| Scratch resistance | g | >1800 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev. 1kg, CS10 wheels) |
mg | <30 | EN 13523-16 |
|
Corrosion resistance: |
Hours | 360 | EN 13523-16 |
|
Corrosion resistance: |
Hours | 1000 | EN 13523-26 |
| Resistance to accelerated ageing by use of heat |
Delta E <0,5 at 200 hours 120oC |
EN 13523-13 |
Notes
The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information.
Corrosion and humidity performance subject to specification such as minimal metallic coating weight.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for HEVAC-downloads
Downloads
EN-Construction-Datasheet-Advantica HEVAC datasheet
AdvanticaEN-Construction-Datasheet-Advantica F Heat Datasheet HEVAC datasheet
EN-Construction-Datasheet-Advantica L Decor Internal Datasheet
Advantica® L Decor Internal Datasheet
EN-Construction-Product-Advantica for HEVAC - Advantica® K
EN-Construction-Product-Advantica for office furniture - Advantica® K | Product features
Advantica® K
A pre-finished steel product with excellent robustness.
Characteristics
- Crinkled surface
- Excellent robustness
Substrates available
- Hot-dip galvanised to EN 10346
- Cold reduced to EN 10130
Options
- Alternative backing coats available
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for office furniture - Advantica® K | Typical properties
Advantica® K
| Properties | Test Standard | ||
|---|---|---|---|
| Nominal organic coating thickness |
μm | 25 | EN 13523-1 |
| Specular gloss (60°) | GU | 30 | EN 13523-2 |
| Adhesion on bending | T | 0 | EN 13523-7 |
| Flexibility (minimum bend radius) |
T | 2 | EN 13523-7 |
| Pencil hardness | 2H | EN 13523-4 | |
| Scratch resistance | g | >2500 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev. 1kg, CS10 wheels) |
mg | <10 | EN 13523-16 |
| Corrosion resistance: Neutral salt spray |
hours | 360 | EN 13523-8 |
| Corrosion resistance category |
RC3 | EN 10169 | |
| UV resistance category | Ruv3 | EN 10169 |
Notes
The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information.
Corrosion and humidity performance subject to specification such as minimal metallic
coating weight.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for HEVAC-downloads
Downloads
EN-Construction-Datasheet-Advantica HEVAC datasheet
AdvanticaEN-Construction-Datasheet-Advantica F Heat Datasheet HEVAC datasheet
EN-Construction-Datasheet-Advantica L Decor Internal Datasheet
Advantica® L Decor Internal Datasheet
EN-Construction-Product-Advantica for HEVAC - Advantica® T
EN-Construction-Product-Advantica for office furniture - Advantica® T | Product features
Advantica® T
A pre-finished steel product with very good scratch resistance.
Characteristics
- Very good scratch resistance
- Good corrosion resistance
- Lightly textured surface appearance
Substrates available
- Hot-dip galvanised to EN 10346
- Cold reduced to EN 10130
Options
- Alternative backing coats available
- Protective film
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for office furniture - Advantica® T | Typical Properties
Advantica® T
| Properties | Test Standard | ||
|---|---|---|---|
| Nominal organic coating thickness |
µm | 25 | EN 13523-1 |
| Specular gloss (60°) | GU | 5-50 | EN 13523-2 |
| Adhesion on bending | T | 0 | EN 13523-7 |
| Flexibility (minimum bend radius) |
T | 1.5 | EN 13523-7 |
| Pencil hardness | F | EN 13523-4 | |
| Scratch resistance | g | >2500 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev. 1kg, CS10 wheels) |
mg | <20 | EN 13523-16 |
| Corrosion resistance: Neutral salt spray |
hours | 360 | EN 13523-8 |
| Corrosion resistance: Humidity |
hours | 1000 | EN 13523-26 |
| Corrosion resistance category |
RC3* | EN 10169 | |
| UV resistance category | Ruv3 | EN 10169 | |
| CPI category | CPI3* | EN 10169 |
Notes
The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information.
*Corrosion and humidity performance subject to specification such as minimal metallic
coating weight.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for HEVAC-downloads
Downloads
EN-Construction-Datasheet-Advantica HEVAC datasheet
AdvanticaEN-Construction-Datasheet-Advantica F Heat Datasheet HEVAC datasheet
EN-Construction-Datasheet-Advantica L Decor Internal Datasheet
Advantica® L Decor Internal Datasheet
EN-Construction-Product-Advantica for HEVAC - Advantica® L Décor External
EN-Construction-Product-Advantica for HEVAC - Advantica® L Décor External | Product features
An aesthetic laminate developed for the manufactured goods market.
Characteristics
- Available in smooth, textured or printed appearance
- Excellent robustness and formability
- Excellent corrosion resistance
Substrates available
- Hot-dip galvanised to EN 10346
Options
- Shade, pattern and texture on request
- Alternative backing coats available
- Protective film
Advantica L Décor External is not recommended for cladding and roofing applications. Users should consult Tata Steel as other products may be more appropriate.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for HEVAC - Advantica® L Décor External | Typical properties
| Properties | Test Standard | ||
|---|---|---|---|
| Nominal organic coating thickness |
μm | 120 to 200 | EN 13523 - 1 |
| Adhesion after indentation | Pass | EN 13523 - 6 | |
| Flexibility (minimum bend radius) |
T | 1 | EN 13523 - 7 |
| Scratch resistance | g | 4000 | EN 13523 - 12 |
| Abrasion resistance (Taber, 250 rev. 1kg, CS10 wheels) |
mg | <15 | EN 13523 - 16 |
| Corrosion resistance: Neutral salt spray |
hours | 500 | EN 13523 - 8 |
| Corrosion resistance: Humidity |
hours | 1500 | EN 13523 - 26 |
| Resistance to UV ageing | contrast | ≥2 after 4000 hours | Test according to EN ISO 4892 - 2/A. Assessment according to DIN EN 20105-A02. |
Notes
The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information.
Corrosion and humidity performance subject to specification such as minimal metallic
coating weight.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for HEVAC-downloads
Downloads
EN-Construction-Datasheet-Advantica HEVAC datasheet
AdvanticaEN-Construction-Datasheet-Advantica F Heat Datasheet HEVAC datasheet
EN-Construction-Datasheet-Advantica L Decor Internal Datasheet
Advantica® L Decor Internal Datasheet
EN-Construction-Product-Advantica for HEVAC - Advantica® L Décor Internal
EN-Construction-Product-Advantica for office furniture - Advantica® L Décor Internal | Product features
Advantica® L Décor
An aesthetic laminate developed for the manufactured goods market.
Characteristics
- Available in smooth, textured or printed appearance
- Excellent robustness and formability
- Excellent corrosion resistance
Substrates available
- Hot-dip galvanised to EN 10346
Options
- Shade, pattern and texture on request
- Alternative backing coats available
- Protective film
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for office furniture - Advantica® L Décor Internal | Typical properties
Typical property tables for Advantica® L Décor (Internal and External)
Advantica® L Décor Internal
| Properties | Test Standard | ||
|---|---|---|---|
| Nominal organic coating thickness |
μm | 120 to 200 | EN 13523-1 |
| Adhesion after indentation | Pass | EN 13523-6 | |
| Flexibility (minimum bend radius) |
T | 1 | EN 13523-7 |
| Scratch resistance | g | 4000 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev. 1kg, CS10 wheels) |
mg | <15 | EN 13523-16 |
| Corrosion resistance: Neutral salt spray |
hours | 500 | EN 13523-8 |
| Corrosion resistance: Humidity |
hours | 1500 | EN 13523-26 |
Advantica® L Décor External
| Properties | Test Standard | ||
|---|---|---|---|
| Nominal organic coating thickness |
μm | 120 to 200 | EN 13523-1 |
| Adhesion after indentation | Pass | EN 13523-6 | |
| Flexibility (minimum bend radius) |
T | 1 | EN 13523-7 |
| Scratch resistance | g | 4000 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev. 1kg, CS10 wheels) |
mg | <15 | EN 13523-16 |
| Corrosion resistance: Neutral salt spray |
hours | 500 | EN 13523-8 |
| Corrosion resistance: Humidity |
hours | 1500 | EN 13523-26 |
| Resistance to UV ageing | contrast | ≥2 after 4000 hours |
Test according to EN ISO 4892 - 2/A Assessment according to DIN EN 20105-A02 |
Notes
The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information.
Corrosion and humidity performance subject to specification such as minimal metallic
coating weight.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for HEVAC-downloads
Downloads
EN-Construction-Datasheet-Advantica HEVAC datasheet
AdvanticaEN-Construction-Datasheet-Advantica F Heat Datasheet HEVAC datasheet
EN-Construction-Datasheet-Advantica L Decor Internal Datasheet
Advantica® L Decor Internal Datasheet
EN-Construction-Product-Advantica for HEVAC - Advantica® GM
EN-Construction-Product-Advantica Lighting - Advantica® GM | Product features
A proven solution for non-aggressive controlled environments with low traffic and minimal food contact.
We have been producing Advantica® GM pre-finished steel over several decades. It is a popular choice in controlled environments where traffic is low and where there is little risk of damage occurring to the product and minimal routine cleaning. It is suitable for use in areas where there is intermittent food contact only.
Advantica® GM is:
- Easy to clean.
- Safe for use where direct food contact is minimal.
Substrates available
- Hot-dip galvanised to EN 10346.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica Lighting - Advantica® GM | Typical properties
Advantica® GM typical properties table
| Properties | Test Standard | ||
|---|---|---|---|
| Nominal organic coating thickness |
μm | 25* | EN 13523-1 |
| Specular gloss (60°) | GU | 20-60 | EN 13523-2 |
| Adhesion on bending | T | 1 | EN 13523-7 |
| Flexibility (minimum bend radius) |
T | 3 | EN 13523-7 |
| Pencil hardness | HB-F | EN 13523-4 | |
| Scratch resistance | g | >1800 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev. 1kg, CS10 wheels) |
mg | <30 | EN 13523-16 |
| Corrosion resistance: Neutral salt spray |
hours | 360 | EN 13523-8 |
| Corrosion resistance: Humidity |
hours | 1000 | EN 13523-26 |
| Corrosion resistance category |
RC3** | EN 10169 | |
| UV resistance category | Ruv3 | EN 10169 | |
| CPI category | CPI3** | EN 10169 |
Notes
The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information. If the product is ordered as anti-static, surface resistance will be between 106–109
Ω/cm2 according to ASTM D257.
*For high white shades higher coating thicknesses are required.
**Corrosion and humidity performance subject to specification such as minimal metallic
coating weight.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica Lighting - Advantica® GM | Testing and certification
Product testing
To ensure the integrity of Advantica® products, Tata Steel uses laboratory tests to measure their performance against corrosion, chemicals and abrasion. All testing of products is carried out to international standards.
Please contact us for full details.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica Lighting - Advantica® GM | Technical data
Manufactured with care
We manufacture Advantica® GM using a hot-dip galvanized substrate to EN 10346. Following a pre-treatment, an anti-corrosive primer is applied. A smooth polyester topcoat is applied on top of the primer. The nominal total organic coating thickness is 25µm.
The reverse side of the product has a backing coat which provides excellent adhesion to most forms of adhesive and insulation.
Forming and processing
Advantica® products can be formed and processed with various techniques including: cutting, shearing, notching, piercing, slitting, press braking, folding, roll forming, spinning and deep drawing.
Cleaning and maintenance
As there are so many different sorts and sources of cleaning products on today’s market, recommendations regarding use of the product is the responsibility of the detergent manufacturer. However, we strongly recommend that you follow the advice given below, which is based on our experience.
For details of the advice please refer to our Controlled environments brochure
Choice of colours
We can supply Advantica® GM in a variety of colours to meet your needs and design aims. In many cases, we can even match our product to a specific colour – please contact us for further information.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for HEVAC-downloads
Downloads
EN-Construction-Datasheet-Advantica HEVAC datasheet
AdvanticaEN-Construction-Datasheet-Advantica F Heat Datasheet HEVAC datasheet
EN-Construction-Datasheet-Advantica L Decor Internal Datasheet
Advantica® L Decor Internal Datasheet
EN-Construction-Product-Advantica for doors and windows
Advantica® for doors and windows
The wide range of products for this sector can meet varying needs such as those of domestic doors, where visual appeal is of great importance, and heavy use industrial doors where high scratch resi
EN-Construction-Product-Advantica for office furniture
Advantica® for office furniture
A range of pre-finished steel products that are specially formulated for interior applications. These include white boards, filing cabinets, paper guillotines, partitioning and shelving.