EN-Construction-Product-Advantica Lighting - Advantica® F Heat | Product features
Advantica® F Heat
- A pre-finished steel product with excellent heat resistance
Characteristics
• Very good heat performance
• Smooth surface appearance
Substrates available
• Hot-dip galvanised to EN 10346
• Cold reduced to EN 10130
Options
• Alternative backing coats available
• Protective film
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica Lighting - Advantica® F Heat | Typical properties
Advantica® F Heat
| Typical properties | Test specification | ||
|---|---|---|---|
| Nominal coating thickness |
μm | 25 | EN 13523-1 |
| Specular gloss (60°) | GU |
50-60 |
EN 13523-2 |
| Adhesion on bending | T | 0 | EN 13523-7 |
| Flexibility (minimum bend radius) |
T | 3 | EN 13523-7 |
| Pencil hardness | F | EN 13523-4 | |
| Scratch resistance | g | >1800 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev. 1kg, CS10 wheels) |
mg | <30 | EN 13523-16 |
|
Corrosion resistance: |
Hours | 360 | EN 13523-16 |
|
Corrosion resistance: |
Hours | 1000 | EN 13523-26 |
| Resistance to accelerated ageing by use of heat |
Delta E <0,5 at 200 hours 120oC |
EN 13523-13 |
Notes
The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information.
Corrosion and humidity performance subject to specification such as minimal metallic coating weight.
If you have any questions or for further information click here to contact us.
EN-Construction-Product-Advantica for HEVAC-downloads
Downloads